Projector
Back to OverviewBS 67****
The projectors of type BS 67**** can be used for the illumination of large operating areas (e. g. tunnellings, roadway crossings, shaft areas, bunker inlets, drives etc.). By their robust design they stand up to all mining and industrial requirements.
| Type of explosion protection: mining |  I M2 Ex (d)eq I |
-20°C to +40°C |
| Type of explosion protection: industry | II 2G Ex (d)eq IIC T4/T3 |
-20°C to +40°C |
| II 2D IP 66 T 90°/80°C |
-20°C to +40°C | |
| Degree of enclosure protection | IP 66 | |
| EC type examination certificate | IBExU 05 ATEX 1111 | |
| Type* |
Performance (Watt) |
Dimensions (mm) |
| BS 672*** | 4 x 36 W | 500 x 400 x 160 |
| BS 676*** | 4 x 55 W | 650 x 400 x 160 |
| BS 678*** | 4 x 80 W | 750 x 400 x 160 |
* more types on request
| Type* |
Nominal voltage |
Frequency |
Performance (Watt) |
Current consumption |
Dimensions (mm) |
| BS 672*** |
230 V |
0 - 50/60 Hz |
4 x 36 W | 0.63 A | 500 x 400 x 160 |
| BS 676*** | 4 x 55 W | 0.96 A | 650 x 400 x 160 | ||
| BS 678*** | 4 x 80 W | 1.39 A | 750 x 400 x 160 |
* more types on request
Characteristics
• Sturdy sheet steel or high-grade sheet steel with a minimum wall thickness of 1.25 mm (can be enlarged to 5 mm maximum)
• Use of commercially standard 4-pin compact fluorescent lamps (socket 2G11)
• Polycarbonate pane, 5 to 10 mm thick, or break- and impact-proof safety glass
• For each lamp individual independent electronical ballast (End-of-Life, powder-filled)
• Different wattages
• Any mounting position
• Single spare parts available
• Simple mounting by attached mounting straps (e. g. for mounting on punched steel plates or other equipment) or eye bolts for wall and roof mounting
• Lamp sockets are dead when lid is opened (optionally)
• Smooth surface, easy to tend
• Up to four cable entries possible
• Projector switch as forced break switch (optionally)
Subject to technical modifications!
